Penrite Dot 4 Brake Fluid 0.5L for Holden Statesman Caprice WM WL WK WH VS VR VQ

Suit Vehicle:

Holden WM Statesman/ Caprice Series, V8 Eng., Auto., (MY10-on) (2009-2013)
Holden WM Statesman/ Caprice Series, V8 Eng., Auto. (2006-2009)
Holden WM Statesman/ Caprice Series, 190kW V6 Eng., Auto. (2006-2009)
Holden WM Statesman/ Caprice Series, 3.6 Litre SIDI V6 Eng., Auto. (2009-2013)
Holden WL Statesman/ Caprice Series, V8 Eng., Auto. (2006) Service Refill Capacity: 0.6 Litres.
Holden WL Statesman/ Caprice Series, V8 Eng., Auto. (2004-2005)
Holden WL Statesman/ Caprice Series, 190kW V6 Eng., Auto. (2006) Service Refill Capacity: 0.6 Litres.
Holden WL Statesman/ Caprice Series, 190kW V6 Eng., Auto. (2004-2005)
Holden WK Statesman/ Caprice Series, V8 Eng., Auto. (2003-2004)
Holden WK Statesman/ Caprice Series, V6 S/C Eng., Auto. (2003-2004)
Holden WK Statesman/ Caprice Series, V6 N/Asp Eng. (2003-2004)
Holden WH Statesman/ Caprice Series II, V8 Eng., Auto. (2001-2003)
Holden WH Statesman/ Caprice Series II, V6 S/C Eng., Auto. (2001-2003)
Holden WH Statesman/ Caprice Series I, V8 Eng., Auto. (1999-2001)
Holden WH Statesman/ Caprice Series I, V6 S/C Eng., Auto (1999-2001)
Holden WH Statesman/ Caprice Series I/ II, V6 N/Asp Eng. (1999-2003)
Holden VS Statesman/ Caprice Series III, V6 Eng., Auto. (1998-1999)
Holden VS Statesman/ Caprice Series. II, V6 Eng., Auto. (1995-1998)
Holden VS Statesman/ Caprice Series II/ III, V8 Eng., Auto. (1995-1999)
Holden VR Statesman/ Caprice Series, V8 Eng., Auto. (1994-1995)
Holden VR Statesman/ Caprice Series, V6 Eng., Auto. (1994-1995)
Holden VQ Statesman/ Caprice Series II, V8 Eng., Auto. (1991-1993)
Holden VQ Statesman/ Caprice Series II, V6 Eng., Auto. (1991-1993)
Holden VQ Statesman/ Caprice, 5.0 Litre V8 Eng., Auto. (1990-1991)

Feature

SUPER DOT 4 Brake Fluid is a premium quality, non-silicone, non-Mineral/petroleum based, fully Synthetic brake fluid designed for use in a wide range of brake and Clutch applications

Application

SUPER DOT 4 BRAKE FLUID is recommended for re-Fill or top-up of brake and clutch systems in passenger cars, 4WD's, motorcycles, light and Heavy Duty commercial vehicles, mining, construction and agricultural equipment that require a non petroleum based DOT 3, DOT 4 or Super DOT 4 brake & clutch Hydraulic fluid.

SUPER DOT 4 BRAKE FLUID is suitable for use where the vehicle manufacturer specifies DOT 3 or DOT 4 brake fluid.

SUPER DOT 4 BRAKE FLUID should be changed according to the manufacturers service specifications.

SUPER DOT 4 BRAKE FLUID can be used for first fill or refilling a brake or clutch system. For best results, the system should always be flushed with Penrite Brake Fluid SUPER DOT 4 prior to first fill or before refilling the system.

Please Note

Do not Mix this product with SILICONE DOT 5 or MINERAL type brake fluids.
For vehicles that require mineral based products i.e. Citroen, Penrite LHM Plus should be used.
Not mixable with Silicone type assembly compounds
Avoid contact with skin, varnish & paint. If skin contact occurs wash with water.

Caution

Brake Fluids are naturally hygroscopic and will absorb water from the air. This will lower the effectiveness of the product. After opening bottle, ensure cap is resealed tightly to avoid water contamination.

SUPER DOT 4 BRAKE FLUID is a possible solution to:Clutch Slave Cylinder

BF0005