PHC HD Clutch Kit for Ford F100 F250 F350 Falcon XA XB XC XD XE Mustang

Calculate Shipping

Local Pickup - $0.00
Pickup from Sydney Warehouse

Australia Post-Eparcel - $0.00
Australia Post Parcel Post

Australia Express Post - $0.00

Description

Contents : PHC Heavy Duty Clutch Kit

Clutch Kit Include :
Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load
Upgraded sprung cushioned cerametallic clutch plate with high torque capacity friction material (Suitable for mix of street and motorsport use reduced friction point will result in more sudden clutch engagement)
Release bearing

Clutch Material : Street Sprung Cushioned Cerametallic

Parameter :
Clutch Plate Dimensions:280 x 10T x 27.5
Torque Capacity: Peak 849Nm, Rated 679Nm

Suit : Ford F100 F250 F350 Falcon XA XB XC XD XE Mustang

Features

Note: eBay's compatibility table is not accurate in some cases. Please refer to the following information we have provided for you.

Suit :

Make	Model/Submodel	Engine	Series	Year	Notes
Ford	American Models 302 H/D	302ci	V8	01/1969-12/1971
Ford	American Models	351ci	V8	01/1969-12/1974
Ford	American Models	390ci	V8	01/1963-12/1970
Ford	F Series F100	240ci	6 Cyl	01/1965-12/1974
Ford	F Series F100	300ci	6 Cyl	01/1965-12/1974
Ford	F Series F250 4WD	300ci	6 Cyl	01/1974-12/1976
Ford	F Series F250	240ci	6 Cyl	01/1965-01/1974
Ford	F Series F250	300ci	6 Cyl	01/1965-12/1974
Ford	F Series F350	240ci	6 Cyl	01/1965-12/1974
Ford	F Series F350	300ci	6 Cyl	01/1965-12/1974
Ford	Falcon XA	V8		03/1972-10/1973	Single Plate Conversion
Ford	Falcon XB	V8		11/1973-07/1976	Single Plate Conversion
Ford	Falcon XC	V8		08/1976-02/1979	Single Plate Conversion
Ford	Falcon XD	V8		03/1979-02/1982	Single Plate Conversion
Ford	Falcon XE	V8		03/1982-09/1984	Single Plate Conversion
Ford	Falcon XY	V8		11/1970-02/1972	Single Plate Conversion
Ford	Mustang	351ci	V8	01/1968-12/1974

1.PHC Heavy Duty Clutch Kit

Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load. Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit.

2.Product Feature

PHC Heavy Duty Clutch Kits are manufactured with a typical 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort.

3.About PHC

After 60 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, we are a trusted source for a complete range of Clutch Kits suited to your vehicle.