PHC HD Sprung Clutch Kit for Holden & Conversion G/Box pull fork 6Cyl Red Motor

Calculate Shipping

Local Pickup - $0.00
Pickup from Sydney Warehouse

Australia Post-Eparcel - $0.00
Australia Post Parcel Post

Australia Express Post - $0.00

Description

Contents : PHC Heavy Duty Clutch Kit

Clutch Kit Include :
Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load
Upgraded cerametallic clutch plate to handle high torque applications (with reduced street driveability due to aggressive friction material)
Release bearing

Clutch Material : Street Sprung cerametallic

Parameter :
Clutch Plate Dimensions:220 x 21T x 29.0
Torque Capacity: Peak 581Nm, Rated 464Nm

Suit : Holden & Conversion G/Box pull fork 6Cyl Red Motor

Features

Note: eBay's compatibility table is not accurate in some cases. Please refer to the following information we have provided for you.

Suit :

Make	Model/Submodel	Engine	Series	Output	Trans	Year
Holden	With Conversion G/Box pull type fork	6 Cyl	Red Motor		Celica G/Box	01/1977-2019

1.PHC Heavy Duty Clutch Kit

Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load. Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit.

2.Product Feature

PHC Heavy Duty Clutch Kits are manufactured with a typical 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort.

3.About PHC

After 60 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, we are a trusted source for a complete range of Clutch Kits suited to your vehicle.